Primary Aerospace Alloy Extrusion
IS 875 Cyclonic Wind Load Tested
Qualicoat Class 2 / Marine Anodizing
Bespoke Shop-Drawing Precision Fit
Explore our certified portfolio of heavy-duty exterior folding systems, structural industrial sections, high-load hardware, and thermal-break assemblies built for high-demand Indian projects.
A technical evaluation of structural deflection, thermal conductivity mitigation, and tropical monsoon water-tightness across the Indian subcontinent.
Indian coastal regions like Mumbai, Chennai, and Kochi face severe torrential monsoons. Standard unsealed door tracks allow severe capillary seepage under high wind loads. Our engineered exterior door frames utilize multi-stepped internal weep-drainage chambers with precision EPDM co-extruded compression gaskets and silicone-injected vulcanized corner joints. Tested to exceed 600 Pa dynamic water pressure, our bifold and sliding tracks eliminate interior flooding without relying on manual drainage plugs.
India’s urban skyline expansion has witnessed super-tall luxury towers across Bengaluru, Hyderabad, and Delhi NCR. High-elevation installations endure peak gust pressures up to 2.5–3.0 kPa. We reinforce primary mullions and transoms with internal structural galvanized steel liners and thick-walled (up to 3.0mm) virgin 6063-T6 virgin aluminium alloys, ensuring structural deflection stays comfortably below L/175, preventing catastrophic panel blowout or structural glass dislodgement.
Ambient traffic noise levels in tier-1 Indian metros consistently exceed 75–85 dB(A). Standard aluminium profiles act as sound conduits. By pairing multi-cavity thermal break profiles with acoustic PVB laminated double/triple glazed units (e.g., 6mm Low-E + 12A + 6mm Acoustic Lami), our door assemblies yield an acoustic sound reduction rating of up to Rw 42 dB, guaranteeing tranquility in luxury penthouses and hospitality suites.
From cyclonic coastal shores to sweltering desert plains, discover how our custom OEM/ODM doors serve varied architectural typologies.
Coastal Arabian Sea / Bay of Bengal
Subjected to high saline humidity and monsoon winds. Standard steel or timber doors deteriorate rapidly due to rust or fungal rot. Our marine-grade anodized (25 µm) and PVDF architectural coated bifold patio doors deliver immense resistance to salt-fog corrosion while opening up entire living areas to oceanfront vistas.
High-Density Urban Skylines
Modern luxury residential high-rises require oversized exterior sliding doors that can handle extreme negative wind load pressure at heights above 100 meters. Our multi-track lift-and-slide doors feature heavy-duty interlocks and anti-lift engineering for complete structural safety and whisper-quiet gliding operation.
Composite Climatic Zones
With temperatures soaring past 45°C in summer and dipping below 4°C in winter, Delhi NCR and northern regions demand maximum energy efficiency. We deploy thermal break polyamide (PA66 GF25) profiles that drop indoor air conditioning electricity consumption by up to 35%, ensuring GRIHA & LEED green building compliance.
A direct side-by-side performance matrix illustrating our structural integrity compared to generic market offerings.
| Performance Indicator | FAM Aluminium OEM/ODM System | Local Market Standard | Applicable BIS / International Standard |
|---|---|---|---|
| Aluminium Alloy & Temper | Virgin 6063-T6 / 6061-T6 (Wall thickness: 2.0mm – 3.0mm) | Recycled local billet (1.2mm – 1.4mm) | IS 733 / ASTM B221 |
| Surface Protection | AkzoNobel / PPG PVDF (3-Coat) or 25µm Marine Anodizing | Standard domestic powder coat (< 50µm) | Qualicoat Class 2 / AAMA 2605 |
| Air Permeability | Class 4 (Tight compression EPDM continuous bulb gaskets) | Class 1 / Class 2 (Felt wool pile strip seals) | EN 12207 / IS 1038 |
| Water Tightness Under Pressure | Class 9A (≥ 600 Pa) with concealed cascade weep-drainage | Class 3A (150 Pa) with exposed face routings | EN 12208 / ASTM E331 |
| Cyclonic Wind Load Deflection | Class C5 (Up to 3000 Pa dynamic positive/negative pressure) | 1200 Pa – 1500 Pa (Mullion visible flex) | IS 875 (Part 3) / EN 12210 |
| Thermal Transmittance (U-Value) | Uf ≤ 1.6 W/m²K (Polyamide PA66 GF25 thermal barrier) | Uf > 5.8 W/m²K (Non-thermal conductive extrusion) | ISO 10077-2 / ECBC Compliance |
| Cycle Durability & Hardware | 100,000 opening cycles (300kg roller assemblies, SUS316) | 15,000 – 20,000 cycles (Cast zinc components) | EN 13126 / BS 6375 |
Strategic structural shifts shaping how Indian architects, developers, and facade consultants specify exterior fenestration.
While uPVC previously dominated mid-tier residential developments in India, architects now aggressively specify thermally broken aluminium. uPVC frames suffer from severe UV degradation, yellowing, and frame sagging under intense Indian summer sunlight. Aluminium offers virtually zero thermal distortion, carries massive multi-ton glass spans, and reduces sightlines down to an ultra-narrow 20mm–45mm.
A fundamental Indian localization requirement is protection from vectors (dengue, malaria) while preserving cross-ventilation. Modern Indian clients reject unsightly aftermarket retrofits. Our OEM systems integrate triple-track sliding configurations with heavy-duty 304 marine-grade stainless steel wire mesh screens built natively into the master frame extrusion.
With India's ambitious Net-Zero targets, leading tier-1 builders (such as DLF, Godrej, Lodha, and Prestige) mandate building envelopes that minimize heat absorption. Demand for double-silver and triple-silver Low-E IGU glass configurations paired with thermally decoupled aluminium sub-frames has surged by over 40% year-on-year across corporate hubs.
Combining heavy industrial extrusion capacity, German CNC tooling precision, and end-to-end export support directly to major Indian ports.
Custom die fabrication, customized alloy chemical formulations (6061, 6063, 6082), custom anodizing hues, and tailored threshold dimensions configured specifically for your project's architectural drawings.
Rigorous 5-tier inspection: spectral alloy verification, digital micrometer wall-thickness checks, corner-crimp tensile load tests, 720-hour salt spray exposure testing, and full trial mock-up assembly before dispatch.
Streamlined maritime supply chains serving Nhava Sheva (Mumbai), Chennai Port, Mundra, and Cochin. Robust reinforced sea-worthy fumigated plywood crating with individual barcoded tag references per window elevation.
Complete structural shop-drawing submissions, wind-load deflection engineering certificates, thermal modeling reports, and remote/onsite contractor installation supervisory support for seamless site execution.
Comprehensive technical and commercial clarity for architects, developers, and contractors purchasing aluminium fenestration systems from abroad.
We supply a complete export documentation suite, including detailed commercial invoices with matching HS codes (Chapter 7610 for aluminium structures), packed bills of lading, COO (Certificate of Origin), and full mill test reports (MTR). When specified, our extrusion alloys and tempering comply with Bureau of Indian Standards (BIS) equivalent grades (IS 733 / IS 1285), expediting smooth clearance through customs clearing agents at Nhava Sheva or Mundra port.
Unlike standard generic profiles where drainage channels vent straight onto the front sill face (which gets blocked under high external gust pressure), our door designs feature an engineered internal sub-sill baffle system. Gravitational stepped water drainage directs runoff away through non-return one-way drainage valves. This prevents water back-pressure even under severe cyclonic gusts exceeding 600 Pa, satisfying strict Class 9A international waterproofing benchmarks.
Yes. Depending on your project requirements and local labor setup, we offer both Complete Knock-Down (CKD) and Fully Assembled (Semi-Unitized) shipments. For high-volume multi-unit residential towers, CKD maximizes shipping container utilization, dramatically reducing sea-freight freight costs per unit. Each CKD profile is pre-machined, punched, and indexed with matching hardware kits. For boutique villas, fully assembled frames arrive ready for immediate wet-seal aperture installation.
For coastal applications within 5 km of the sea, standard architectural powder coating will chalk or corrode within 24 to 36 months. We recommend either our 25-micron class architectural anodized finishes or Qualicoat Class 2 / AAMA 2605 fluoropolymer PVDF resin coatings (70% Kynar 500). These finishes withstand extreme ultraviolet degradation and coastal salt-spray fog, and are backed by comprehensive 15–25 year finish warranties.
Following final structural shop-drawing signoff and glass build-up approval, production takes approximately 25 to 35 business days for standard and custom profile runs. Ocean transit time from our export hub to Western Indian ports (Nhava Sheva/Mundra) is typically 14 to 18 days, and to Eastern/Southern ports (Chennai/Cochin) roughly 12 to 16 days. Complete door-to-port timeline averages 6 to 8 weeks.
Yes. Over 70% of our shipments to Indian developers specify integrated high-tensile 304/316 grade stainless steel mesh or pleated accordion insect screens. Because these screens are engineered directly into the primary extrusion system rather than added as an afterthought, our door assemblies preserve clean sightlines, ensure smooth multi-track gliding, and provide impenetrable pest protection.